Thorens TD 206 User Manual download pdf (Page 24)

Place the turntable on a rigid support and use the sup-

plied spirit level to make sure that it is perfectly hori-

zontal. If necessary, readjust the suspension system.

➔ Page 27

Thorens turntables are relatively resistant to vibration.

However, vibration can have adverse effects on any

turntable, particularly if a high-quality pick-up cartridge

is used. You should therefore place the turntable on a

sturdy piece of furniture, ideally at some distance from

the loudspeakers.

older houses with beam ﬂoors, however, this may not be

enough to properly isolate the turntable from vibrations.

In this case we recommend placing the turntable on a

wall shelf that is attached to a supporting wall.

When siting the turntable, make sure that it is at a rea-

sonable distance from any existing electronic equip-

ment (such as ampliﬁers, receivers or CD players) so

as to avoid electromagnetic interference in the pick-up

cartridge, which could cause a hum in the signal. The

same applies to the cable connecting the turntable to

the ampliﬁer.

You can detect and eliminate electromagnetic inter-

ference by changing the position of the turntable with

respect to other pieces of equipment.

Setup and Assembly

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

No comments

Thorens TD 206 User Manual Page 24