Thorens TD 206 User Manual download pdf (Page 25)

Loop the drive belt around the sub-platter and then

around the motor pulley. ➔ Fig. 2

Avoid oil or grease coming into contact with the belt,

pulley or sub-platter. If necessary, these parts can be

cleaned with glass cleaner or pure alcohol and a lint-

free cloth.

The belt tension is factory-adjusted. If it needs to be re-

adjusted (e.g. to compensate for gradual belt stretch),

loosen the locking screw of the eccentric motor support

ring and carefully rotate the ring. ➔ Fig. 2

If the belt tension is changed, the platter speed will

need to be reset. ➔ Page 27

The drive belt should be replaced every few years.

Thorens replacement belts are available from any

Thorens dealer or distributor.

Setup and Assembly

Fig. 2

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

No comments

Thorens TD 206 User Manual Page 25